Schultz & Larsen | Classic DL
In the Schultz & Larsen range, the Classic is the working rifle, an ideal choice for everyday use and hard work.    The action of the Classic has a surface treatment that shrugs off the worst the weather can do.  The bolt handle is dovetailed solidly into the bolt and the three lug low lift bolt locks solidly into the barrel. With an average weight of just 3.4 kg, the Classic is the ideal carry rifle.
The Classic is also available in the Classic Traveller version.
The Classic Synthetic is the latest addition to the range.
The Classic is available in Right or Left hand.
The Classic stock features a straight comb without a cheek piece and is slim and comfortable whilst being light to carry. The standard stock is good walnut heartwood with a straight and strong grain structure and pleasant colour & tone. Finished with linseed oil as are all Schultz & Larsen stocks. Wood upgrades are available.
 
Scope Mounting
The top of the Classic action is milled to accept the Schultz & Larsen ‘Slide & Lock” scope mounts, incorporating Summer and Winter scope position.  For those who prefer a different mount, the action is drilled and tapped to accept Weaver or other bases.  The radius of the action is 17mm and the hole spacing 22mm
Sling Swivels
There are two sling swivel studs pre-fitted to the Classic. One is at the rear, on the bottom of the stock in front of the recoil pad, and one on the forearm. The swivel studs accept sling swivels of 8mm wide, with 3.5mm pin diamter. See our available options in the Accessories Section.
Switch Barrel System
The Classic has a switch barrel system allowing the barrel to be changed for any other in its calibre group with just a simple wrench.  The standard bolt can be used with all calibres in the standard calibre group but if changing to a Magnum calibre you will need to change the bolt.
 
Safe Construction
Safety has top priority with all locking parts designed and tested to withstand at least three times normal load.  In the case of an overload resulting in a primer blow-out or case rupture, the high pressure gas can escape through holes in the front of the action and on the side of the bolt.  This, coupled with the extremely tight fit of the bolt and action, ensures that the shooter is not injured.
The safety catch is three position and locks the bolt and blocks the firing pin.  The centre position allows unloading of the rifle whilst the safety is engaged.
 
The Classic Bolt
The bolt lift is 60º making it a fast an effective mechanism. The perfectly machined bolt glides into the action effortlessly and locks into the barrel once closed. The Classic's bolt handle is a straight arm, dovetailed into the bolt body. There are two variations of bolt, one is typically marked "S" for Standard Calibres and the other is marked "M" for Magnum Calibres.